Before Using the
LCD
TV Set
To
use your LCD TV set, perform steps below.
Check the supplied accessories. (See page
5.)
Insert two "AAA" size batteries into the remote control. (See page
7.)
• Open the battery cover, and then insert batteries with their terminals corresponding to the
(+)
and
(-)
indications in the
battery compartment.
Connect the antenna cable. (See page
8.)
Connect with external devices. (See page
11
)
INPUT3 Tormlnal
Terminal
for
INPUT
connection.
INPUTI Terminal (COMPONENT)
Terminal
for
component
connection.
INPUT2 Tormlnal
Terminal
for
S-video
connection.
\'c
Connect the AC cord to the AC INPUT terminal
of
the LCD TV set and plug in the
AC
cord to the wall outlet.
(See page 9.)
Turn
on
the main power. (See page 10.)
• Press POWER on the upper side
of
the main unit.
Start EZ SETUP. (See page 13.)
• The broadcasting channels will be memorized automatically.
To Next Page
Loading...
