Useful Features
Press ENTER. The tuner will search through
all
available channels
in
your area
and
add them
to
the TV
memory.
Press
<lllIII/~
to select "SETUP".
Press .it../Y to select "DIGITAL
CH
SEARCH", and
press ENTER.
Press.it../Y to select
"CH
SETUP", and press ENTER.
Press
<lllIII/~
to select "SETUP".
Press.it../Y to select "ANALOG
CH
SEARCH", and
press ENTER.
Press .it../Y
to
select
"CH
SETUP", and press ENTER.
EZ
SETUP
AIR/CABLE
ANALOG
ANALOG
CH
SEARCH
-
eH
MEMORY
ANTENNA
SETUp·DIGITAL
EZ
SETUP
AIR/CABLE
ANALOG
-
DIGITAL
eM
SEARCH
eM
MEMORY
ANTENNA
SETUP-DIGITAL
Press ENTER. The tuner will search through
all
available channels
in
your area and add them to the TV
memory.
• DIGITAL CH SEARCH
Saving DIGITAL broadcast
TV
channels into
memory.
Press MENU to display the Menu screen.
INOTE >
• To interrupt
CH
SEARCH, press MENU or MENU RETURN.
ANALOG
CH
SEARCH or DIGITAL
CH
SEARCH will stop at
the current channel and will not add any higher channel.
•
ANALOG
CH SEARCH
Saving ANALOG broadcast
TV
channels into
memory.
Press MENU to display the Menu screen.
INOTE >
• Receivable ANALOG channels of your LCD TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13 1 (HRC and IRC)
UHF: 14 through 69 2 through 125 (STD, HRC and
IRC)
EZ
SETUP
I
DIG
I
TAL
eH
SEARCH
CH
MEMORY
ANTENNA
SETUP·DIGITAl
Press MENU to exit.
Press MENU to display the Menu screen.
Press
~
to select
"CH
SETUP", and press ENTER.
Press .it../T to select "AIR/CABLE ANALOG", and
press ENTER.
Press .it../T to select desireQ setting, and press
ENTER. -
Press
<lllIII~
to select "SETUP".
• SETTING THE
AIR/CABLE
ANALOG
It is necessary to set the receiving mode to
AI
R or
CABLE ANALOG channels to receive locally broad- .
cast TV programs.
CHSETUP
• EZ SETUP
When you move to an area with different broad-
casting signals, you may have to set the channel
numbers with the EZ SETUP function. To activate
EZ SETUP, perform the following procedures.
CD
Press
~.r"
to select "CH SETUP"
in
the SETUP screen,
and press ENTER. (See page
18.)
® Press
~J'"
to select "EZ SETUP", and press ENTER.
® Press
.A.,""
to select "YES", and press ENTER.
@)
Press
.A.,""
to select desired language, and press
ENTER.
@ Before the next operation, make sure what kind of
connection is made with your TV. Press
.A.,""
to select
"AIR" or "CABLE ANALOG", and then press ENTER. If
you select "AIR", your TV will search for both ANALOG
and DIGITAL (air) channels, and if you select "CABLE
ANALOG", your TV will only search for analog cable
channels. If you select "OFF", EZ SETUP will
be
canceled.
® Press
.A.,""
to select "YES" ,and press ENTER
in
the
"START EZ SETUP?" Screen to start searching.
INOTE >
•
If
no channel is found, make sure what kind of connection is
made with your TV, and try EZ SETUP again.
@23
To Next Page
Loading...
