Useful Features (Continued)
Repeat steps 1 to 3 of Setting V-CHIP, or 1 and 2
of Canceling
the
V-CHIP BLOCK screen
while
V-
CHIP BLOCK
is
activated, then "INPUT SECRET
NO." will be displayed. .
Press and hold both
CH
(A)
and VOL (+) on the
main unit simultaneously until the message "INPUT
SECRET NO." blinks.
Press MENU to exit.
aalill
Repeat steps 1-to 3 of Setting V-CHIP, then
"INPUT SECRET NO." will
be
displayed.
Input the 4-digit secret number by using
Channel
Select;
the V-CHIP select mode will
be
displayed.
Set the V-CHIP BLOCK again.
Example: Digital TV mode.
• Changing
or
clearing
the
SECRET
NUMBER
If you forget the secret number, clear the secret
number as follows.
• Changing V-CHIP BLOCK settings
•••
•••
•••
0.6
TV-14
DLSV
"V-CHIP HAS BEEN ACTIVATED" appears if you
watch a program with the same Program Rating
data you configured.
V-CHIP
HAS
BEEN
ACTIVATED
Input the 4-digit secret number by using Channel
Select;
V-CHIP BLOCK is temporarily canceled. If
you input an incorrect secret number, "SECRET
NO.
IS
INCORRECT" is displayed.
In
this case,
input the correct secret number.
1111.11
Press MENU to exit.
Press MENU to display "INPUT SECRET NO.".
INOTE >
• "V-CHIP HAS BEEN ACTIVATED" will not be displayed
if "STATUS" is set to "OFF".
INOTE >
• If "STATUS" is set to "OFF", V-CHIP BLOCK will not
be activated.
Repeat steps 1 to 4 of Setting V-CHIP.
Press
£.IY
to select "STATUS", and press
ENTER.
Example: Digital TV mode.
• Canceling
the
V-CHIP BLOCK screen
while
V-CHIP BLOCK
is
activated
• Activating V-CHIP BLOCK
• Setting STATUS
28
@
To Next Page
Loading...
