b. Unpacking:
1.
To protect the machine while in transit it is necessary to cover it with a
rust proof coating and a crate or plastic wrapping. In the event, there is
damage due to moisture, please contact our agent or the transporter.
2.
After unpacking, make sure all tools and accessories are intact. If not,
contact our agent.
3.
Restore headstock to its normal position (Fig. 3, Page 3)
4.
Do not move the sliding surfaces until all of the protective rustproof
coating is removed and all surfaces are well oiled.
5.
Do not remove the oil wipers when cleaning the machine.
6.
Do not use gasoline or other flammable cleaners.
To Next Page
Loading...
Need help?
General
