Sharp MX-2310U

SPECIFICATIONS
16
Automatic document feeder (Standard equipment)
Name
Reversing Single Pass Feeder (RSPF)
Document feeder types
Reversing Single Pass Feeder (RSPF)
Original paper sizes
A3 (11" × 17") to A5 (5-1/2" × 8-1/2")
Original paper types
Paper weight Thin paper 35 g/m
2
(9 lbs.) to 49 g/m
2
(13 lbs.)
Plain paper 50 g/m
2
(13 lbs.) to 128 g/m
2
(32 lbs.)
Two-sided 50 g/m
2
(13 lbs.) to 105 g/m
2
(28 lbs.)
Paper storage capacity
100 sheets (80 g/m
2
(21 lbs.)) (or maximum stack height of 13 mm
(33/64"))
Scan speed (copy)
B/W: 50 one-sided sheets/minute
(A4 (8-1/2" × 11") horizontal) (600 × 400 dpi)
Colour: 36 one-sided sheets/minute
(A4 (8-1/2" × 11") horizontal) (600 × 600 dpi)
Tray
Name
Tray 1
(MX-DE12)
Tray 2
(MX-DE13)
Tray 3
(MX-DE14)
Paper sizes
A3 (11" × 17") to A5R (5-1/2" × 8-1/2"R)
Useable paper
60 g/m
2
(16 lbs.) to 209 g/m
2
(56 lbs.)
Paper capacity
500 sheets 1,000 (500 × 2) 1,500 (500 × 3)
Dimensions
583 mm (W) × 577 mm (D) × 382 mm (H)
(22-61/64" (W) × 22-46/64" (D) × 15-1/64" (H))
Weight
MX-DE12: Approx. 21 kg (46 lbs.)
MX-DE13: Approx. 23 kg (51 lbs.)
MX-DE14: Approx. 28 kg (61 lbs.)
Name
Finisher (MX-FN17)
Paper sizes
Paper sizes Depends on feeder specications
Useable paper
Paper weight 55 g/m
2
(15 lbs.) to 256 g/m
2
(68 lbs.)
No. of trays
Tray 1
Tray capacity (80g/m
2
(21 lbs.))
Non-stapled A3 wide (12" × 18") / A3 (11" × 17") /
B4 (8-1/2" × 14"): 250 sheets
A4 (8-1/2" × 11") / A4R (8-1/2" × 11"R) /
B5 / B5R (7-1/4” × 10-1/2”R) / A5R (5-1/2” × 8-1/2”R):
500 sheets
Staple function A3 (11" × 17") / B4 (8-1/2" × 14"): 30 units or 250
sheets
A4 (8-1/2" × 11") /A4R (8-1/2" × 11"R) /
B5: 30 units or 500 sheets
Finisher
Max. no. of stapled sheets
Max. no. of 50 sheets (A4 (8-1/2" × 11"), A4R (8-1/2" × 11"R), B5)
Max. no. of 30 sheets (A3 (11" × 17"), B4 (8-1/2" × 14"))
Staple position
3 locations (front, rear or both)
Required power supply
Supplied from this machine
Weight
Approx. 12 kg (26 lbs.)
Dimensions
When output paper tray is stored
428 mm (W) × 593 mm (D) × 198mm (H)
(16-55/64" (W) × 23-22/64" (D) × 7-51/64" (H))
When output paper tray is extended
612 mm (W) × 593 mm (D) × 198 mm (H)
(24-6/64" (W) × 23-22/64" (D) × 7-51/64" (H))