Sharp MX-2310U

17
Punch module
Name
Punch module (MX-PN11A, MX-PN11B, MX-PN11C, MX-PN11D) for nisher
Paper size for punch module
A3 (11" × 17") to B5R (7-1/4" × 10-1/2"R)
 Cannot punch special types of paper such as OHP.
Holes
MX-PN11A 2 holes
MX-PN11B 3 holes
MX-PN11C 4 holes
MX-PN11D 4 holes (wide)
Required power supply
Supplied from nisher
Weight
Approx. 3 kg (7 lbs.)
Dimensions
98 mm (W) × 477 mm (D) × 137 mm (H)
(3-55/64" (W) × 18-50/64" (D) × 5-26/64" (H))
Fax Specications
Transmission time
Approx. 2 seconds *1 (A4 (8-1/2" × 11") Sharp standard paper, normal
characters, Super G3 (JBIG))
Memory
1GB
Notes
Touch dial memory Max. of 1,000 entries (Including group dialing
for fax, scanner, and Internet fax)
Group dial Max. of 500 entries
Mass transmissions Max. of 500 recipients
*1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the
International Telecommunications Union (ITU-T). This is the speed for when sending an A4 (8-1/2" × 11")
size piece of paper of around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed
mode (33.6 kbps). This is the transmission speed for image information only and does not include time for
transmission control. The actual time needed for a transmission depends on the content of the text, type
of receiving fax machine, and telephone line conditions.
Useable lines
General phone lines (PSTN), automated branch exchange (PBX)
Scanning line density
Normal characters: 8 dot/mm × 3.85 chars/mm
Small characters: 8 dot/mm × 7.7 line/mm
Fine characters: 8 dot/mm × 15.4 line/mm
High-denition: 16 dot/mm × 15.4 line/mm
Connection speed
Super G3: 33.6 kbps, G3: 14.4 kbps
Coding method
MH, MR, MMR, JBIG
Connection mode
Super G3 / G3
Original paper sizes for transmission
A3 (11" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max. length of
1,000 mm* can be transmitted (one-sided and B/W only).)
* Internet fax (optional) is up to 800 mm (at 600 x 600 dpi).
Registered paper size
A3 (11" × 17") to A5 (5-1/2" × 8-1/2")