Sharp MX-2630N

1-125
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
4
Remove the empty staple cartridge
from the staple case.
5
Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge in until it clicks into place.
After inserting the staple cartridge, pull the seal that holds
the staples straight out.
Do not remove the seal from the cartridge before inserting the cartridge into the case.
6
Attach the staple case.
Push the staple case in until it clicks into place.
7
Push the staple unit back in.