Sharp MX-2630N User Manual

2-89
COPIER►OTHER FUNCTIONS
COPYING IN THE CENTRE OF THE PAPER (CENTRING)
This function centres the copied image on the paper.
This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the
image is reduced.
Not using the centring function Using the centring function
Centring must be specified before scanning the original.
• When the original size or the paper size is displayed as a special size, this function cannot be used.
• This function cannot be used in combination with an enlargement setting. If enlargement of 101% or more is selected, the
enlargement is automatically returned to 100%.
1
Tap the [Others] key, and tap the [Centring] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
• To cancel the centring setting:
Tap the [Centring] key to clear the checkmark.
• To cancel all settings:
Tap the [CA] key.
2
Tap the [Colour Start] or [B/W Start] key to start copying.

Sharp MX-2630N Specifications

General

Print Speed	26 ppm
Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Memory	5 GB
Hard Disk Drive	250 GB
Scan Resolution	600 x 600 dpi
Paper Capacity	Maximum: 6, 300 sheets
Connectivity	USB 2.0, 10/100/1000Base-T Ethernet
Display	7-inch color touchscreen
Type	Color Laser
Original Size	A3
Network Interface	10/100/1000Base-T Ethernet
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux