Sharp MX-2630N User Manual

2-133
COPIER►OTHER FUNCTIONS
ADJUSTING THE BRIGHTNESS OF A COPY
(BRIGHTNESS)
This function adjusts the brightness of a colour copy image.
Brightness must be specified before scanning the original.
1
Tap the [Others] key, and tap the [Brightness] key.
2
Tap the key or slide the slider to
adjust the brightness.
After the settings are completed, tap and [Back] keys in
sequence.
To cancel the brightness setting:
Tap the [Off] key.
3
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-82)
► DOCUMENT GLASS (page 1-84)
To cancel all settings:
Tap the [CA] key.
4
Tap the [Colour Start] key to start copying.
Dark Originals Light
Others
Preview
Start
Colour
Start
Back
Brightness
This setting is only applied to colour.
Colour Mode
Exposure
Select Type/Exposure
Off
On
Light
-2 -1 0
21
Change Size/Direction.
Original
Dark
Adjust Outline of Image
Sharpness
Intensity
Adjust Intensity
A3
CA
B/W

Sharp MX-2630N Specifications

General

Print Speed	26 ppm
Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Memory	5 GB
Hard Disk Drive	250 GB
Scan Resolution	600 x 600 dpi
Paper Capacity	Maximum: 6, 300 sheets
Connectivity	USB 2.0, 10/100/1000Base-T Ethernet
Display	7-inch color touchscreen
Type	Color Laser
Original Size	A3
Network Interface	10/100/1000Base-T Ethernet
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux