Sharp MX-2630N

7-43
SYSTEM SETTINGS►SETTING MODE LIST
*1 When an internet fax expansion kit is installed.
*2 When a facsimile expansion kit is installed.
*3 This setting is configured in setting mode on the machine.
*4 This setting is configured in setting mode on the web page.
• Date/Time Enabled No Yes
 Print Colour Black No Yes
 Print Position No Yes
• Vertical position No Yes
- Print Upper Side of Paper Disabled No Yes
- Print Lower Side of Paper Enabled No Yes
• Horizontal position No Yes
- Print Left Side of Paper Enabled No Yes
- Print Right Side of Paper Disabled No Yes
 Select the Job to Print No Yes
• Copy Enabled No Yes
•Print Enabled No Yes
• Prints(Doc.Filing) Enabled No Yes
• Internet Fax Receive
*1
Enabled No Yes
• Fax Receive
*2
Enabled No Yes
• List Prints Enabled No Yes
 Initialize Private Data/Data in Machine
*3
– No Yes
 Security code input
*3
– No Yes
 Audit Log No Yes
 Security Control No Yes
•Audit Log Disabled No Yes
 Storage/Send Settings No Yes
• Store Setting No Yes
- Stored to Storage Enabled No Yes
• Send Settings No Yes
-Server Send Disabled No Yes
- Hostname or IP Address (Required) – No Yes
- Enable SSL Off No Yes
- Port Number 514 No Yes
- Port Number (Use SSL) 6514 No Yes
 Save/Delete Audit Log No Yes
• Save Audit Log
*4
– No Yes
• Delete Audit Log – No Yes
Setup Items Factory default setting U A