Sharp MX-2700N

3
SELECTING THE RESOLUTION AND
EXPOSURE
The resolution and exposure can be selected to match the characteristics of the original, such as text or photo,
the size of the text, and the darkness of the image.
When sending originals with small text or light colors, adjust the resolution and exposure.
Changing the resolution
The following example explains how to set the resolution to [Fine] and [Half Tone] when sending an original with
small text.
1
Place the original.
When using the document glass, place the original
with the side to be scanned face down.
2
Select the resolution in the touch panel.
(1) Touch the [Image Settings] key.
(2) Touch the [Resolution] key.
(3) Touch the [Fine] key.
The resolution increases in the following order:
[Standard], [Fine], [Super Fine], [Ultra Fine].
(4) Touch the [Half Tone] key.
Select [Half Tone] for a photo or illustration with
shading to further improve the image.
[Half Tone] cannot be selected when [Standard]
is selected.
(5) Touch the [OK] key.
3
Enter the fax number of the receiving fax
machine and press the [BLACK & WHITE
START] key.
The side to be scanned must be face up!
OK
Fax
Resolution
Quick File
File
Special Modes
Sub Address
Address Book
Fax
Mode Switch
Image
Settings
Direct TX
Memory TX
Auto Reception
Fax Memory:100%
Auto
Exposure
Standard
Resolution
Original
Special Modes
Standard
Fine
Super Fine
Ultra Fine
Half Tone
Auto 8 x11
1
/
2
(1)
(2)
(3)
(4)
(5)
Cancel scanning
Correct a mistake