Sharp MX-2700N

24
SELECTING THE EXPOSURE MODE
For a clearer copy result, select an exposure mode appropriate for the
original type.
The example of copying an original with light colors such as pencil
writing is explained below.
1
Place the original.
When using the document glass, place the original
with the side to be scanned face down.
2
Select exposure settings in the touch
panel.
(1) Touch the [Exposure] key.
(2) Use the keys to switch through the
screens.
(3) Touch the [Light Original] key.
(4) Darken the exposure with the key.
Nine levels are available for the exposure.
Darken the exposure with the key, and
lighten the exposure with the key.
(5) Touch the [OK] key.
3
Set the number of copies and then press
the [COLOR START] key or the [BLACK
& WHITE START] key.
Light original
Exposure adjustment
The side to be scanned must be face up!
531
Ready to scan for copy.
2-Sided Copy
Original
0
Output
Special Modes
File
Quick File
Full Color
Color Mode
2.
3.
4.
1.
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
Exposure
OK
1/2
Text
Auto
Photo
Printed
Photo
Text/Photo
Text/
Prtd.Photo
Manual
Exposure
OK
2/2
Light
Original
Map
8 x11
1
/
2
11x17
8 x11
1
/
2
8 x14
1
/
2
8 x11R
1
/
2
8 x11
1
/
2
Manual
(1)
(2)
(3)
(5)
(4)
or
Cancel copying Cancel scanning Correct sets