15
SPECIAL FAX MODES
The special modes make it possible to perform a variety of fax transmissions for specific purposes.
The following pages show the types of fax transmissions that can be performed. (The procedures for using each
special mode are not explained.)
Each special mode has its own settings and procedures, however, the basic procedure is the same for all modes.
The basic procedure for selecting a special mode is explained on the next page using "Erase" as an example.
For the specific procedures for using the special modes, see "7. CONVENIENT FUNCTIONS" in the
Facsimile Guide.
Special modes
To use a special mode, open the special modes
menu and touch the key of mode that you wish to
use. The menu consists of three screens. Use the
keys to switch through the screens.
Touch the [Special Modes] key in the base screen to
open the special modes menu. (You can also open
the special modes menu by touching the [Special
Modes] key that appears after the [Image Settings]
key is touched.)
When a special mode key encircled by is touched, the key is highlighted and the setting is completed.
When any other special mode key is touched, a setting screen appears to let you select settings for that mode.
The keys that appear will vary depending on what peripheral devices are installed.
Ready to send.
Speaker
Resend
Special Modes
File
Quick File
Fax
Mode Switch
Image
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
Address Book
Sub Address
Scan Send
Auto
8 x11
1
/
2
1st screen 2nd screen
3rd screen
Fax
Special Modes
OK
1/3
Timer
EraseProgram
Dual Page
Scan
Card Shot
2in1
Fax
Special Modes
OK
2/3
Polling
Transaction
Report
Own Number
Select
Memory Box
Fax
Special Modes
OK
3/3
File
Job
Build
Slow Scan
Mode
Quick File
Mixed Size
Original
To Next Page
Loading...
