Sharp MX-2700N

5
CHANGING THE SIZE OF THE ORIGINAL
The size of the original and the paper size can be specified before transmission.
The procedure below explains how to fax both sides of a 8-1/2" x 11" original at 11" x 17" size.
1
Place the original.
When using the document glass, place the original
with the side to be scanned face down.
2
Select the original size settings in the
touch panel.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
(3) Touch the [2-Sided Booklet] key.
Touch this key to send a 2-sided original.
(4) Touch the [Send Size] key.
(5) Touch the desired send size key
(example: 11x17).
(6) Touch the [OK] key.
(7) Touch the [OK] key.
3
Enter the fax number of the receiving fax
machine and press the [BLACK & WHITE
START] key.
The side to be scanned must be face up!
OK
Fax
Original
Quick File
File
Special Modes
Sub Address
Address Book
Fax
Mode Switch
Image
Settings
Direct TX
Memory TX
Auto Reception
Fax Memory:100%
Auto
Exposure
Standard
Resolution
Original
Special Modes
2-Sided
Booklet
2-Sided
Tablet
Scan Size
Send Size
Auto
100%
Image Orientation
OK
Fax
Original
2-Sided
Booklet
2-Sided
Tablet
Scan Size
Send Size
11x17
129%
Image Orientation
OK
11x17
Inch
AB
Auto 8 x11
1
/
2
Auto 8 x11
1
/
2
Auto 8 x11
1
/
2
8 x11R
1
/
2
8 x13
1
/
2
8 x14
1
/
2
5 x8
1
/
2
1
/
2
5 x8 R
1
/
2
1
/
2
8 x11
1
/
2
Fax
Original
Manual
Auto
8 x11
1
/
2
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Cancel scanning
Correct a mistake