18
Sending a large number of pages (Job Build)
Sending a fax directly from a computer (PC-Fax)
The machine also has these functions
For detailed information on each function, see "6. PRINTING A TRANSACTION REPORT / IMAGE SENDING
ACTIVITY REPORT" or "7. CONVENIENT FUNCTIONS" in the Facsimile Guide.
• Changing the print settings for the transaction report (Transaction Report)
• Sending a fax at a specified time (Timer)
• Using stored settings to send a fax (Programs)
• Temporarily changing the sender information (Own Number Select)
• Faxing different sizes of originals together (Mixed Size Original)
• Faxing thin originals (Slow Scan Mode)
• Calling a fax machine and initiating fax reception (Polling)
• Sending a fax when a fax machine polls your machine (Polling Memory)
• Using F-code communication
• Connecting and using an existing phone (Extension Phone Connection)
• Forwarding a received fax to an e-mail address (Inbound Routing Settings)
The maximum number of originals that
can be fed through the automatic
document feeder at once is 100 sheets.
If you need to fax more than 100 originals
as a single job, the job build function lets
you divide the originals into sets and feed
each set.
A document on a computer can be sent
via the machine as a fax. Select the
PC-Fax driver as the printer driver for your
computer and then select the print
command in the software application.
Image data for transmission will be
created and sent as a fax.
For more information, see the Help file for the PC-Fax driver.
100
200
100
Transmission
Transmission
To Next Page
Loading...
