41
Adjusting the intensity of a copy (Intensity)
Checking copies before printing (Proof Copy)
Copying originals that are different sizes
(Mixed Size Original)
Copying thin originals (Slow Scan Mode)
Use this function to adjust the intensity
of a copy.
When this function is used, only one set
of copies is made, regardless of the
number of sets specified. After the first
set is checked for errors, the remaining
sets can be printed.
Even when a 5-1/2" x 8-1/2" original is
mixed in with 8-1/2" x 11" originals, all
originals can be copied at once.
(An automatic document feeder must
be installed.)
Use this function to copy thin originals,
which misfeed easily, using the
automatic document feeder.
(An automatic document feeder must
be installed.)
Intensity +Intensity + Intensity +Intensity +
5 sets
1 set 4 sets
Check
8-1/2x11
5-1/2x8-1/2
8-1/2x11
5-1/2x8-1/2
To Next Page
Loading...
