Sharp MX-3070N

MAINTENANCE
SHARP
16
Maintenance Indications:
DK
Black Drum Counter has reached the specified life.
Replace Black Drum &
Main Charge Kit
Process
Section
(Drum)
DC
Cyan Drum Counter has reached the specified life.
Replace Cyan Drum &
Main Charge Kit
DM
Magenta Drum Counter has reached the specified life.
Replace Cyan Drum &
Main Charge Kit
DY
Yellow Drum Counter has reached the specified life.
Replace Cyan Drum &
Main Charge Kit
VK
Black Developer Counter has reached the specified life.
Replace Black Developer
Process
Section
(Developer)
VC
Cyan Developer Counter has reached the specified life.
Replace Colour
Developer Kit (CMY)
VM
Magenta Developer Counter has reached the specified life.
VY
Yellow Developer Counter has reached the specified life.
FK1
Fusing Belt Print Counter has reached the specified limit.
Replace the Fusing Belt Kit
Fuser
Section
FK2
Fuser Pressure Roller Print Counter has reached the
specified limit.
Replace the Pressure
Roller Kit
FK3
Fuser Web Cleaner (Counter) has reached the specified
limit - (Pop Up FK3 Error – Web End Detected)
Replace the Web Cleaning
Kit
TK1
Primary Transfer Unit Counter has reached the
specified limit.
Replace the Primary
Transfer Belt & Blade Kits
Transfer
Section
TK2
Secondary Transfer Unit Counter has reached the
specified limit.
Replace the Secondary
Transfer Roller Kit
TK3
PTC Unit Counter has reached the specified limit.
Replace the PTC Unit
Starting Powder:
The following starting powder should be applied to the relevant consumable item during maintenance:-
Starting Powder
OPC Drum
Primary Transfer Belt
MX-3070N
MX-3570N
MX-4070N
UKOG-0312FCZZ
[Stearic Acid]
CKOG-0345DS51
[Yellow Toner]
CAUTION:
Do not apply Stearic Acid (UKOG-0312FCZZ), Strontium Titanium (UKOG-0316FCZZ) or Titanium Hydroxide
(UKOG-0322FCZZ) starting powder to the Primary Transfer Belt.