Sharp MX-3070N - Page 6

PERIPHERAL SPECIFICATION
SHARP
6
MX-FN30 – 3K FINISHER
Paper size:-
Non offset
Staple
SRA3 to A5R
A3 to B5
Output capacity (80 g/m
2
):
3,000 sheets or 200 bundles or 423mm or less (A4, 8.5x11).
1,500 sheets or 100 bundles or 216mm or less (A3W, 11x17).
Stapling capacity (90 g/m
2
):
65 sheets (up to A4), 30 sheets (up to A3 & mixed).
Max: 300 g/m
2
(2 sheets) + 90 g/m
2
(63 sheets)
Staple position:
3 locations (Front slant, Rear slant & 2 staples).
Staple less staple:
Supported - Maximum 5 sheets (A3, A4):-
Recommended: Up to 5 sheets (64 g/m
2
), Up to 4 sheets
(64-81 g/m
2
), Up to 3 sheets (81 to 105 g/m
2
).
Manual staple:
Supported (Rear slant only).
Punch Unit:
Opt: MX-PN16B/C/D
Power requirements:
From Main Engine
MX-FN31 – 3K SADDLE FINISHER
Paper size:-
Non offset
Staple
Saddle
SRA3 to A5R
A3 to B5
A3W, A3, A4R, B4.
Output capacity (80 g/m
2
):
Offset Tray
Saddle Tray
3,000 sheets or 200 bundles or 423mm or less (A4, 8.5x11).
1,500 sheets or 100 bundles or 216mm or less (A3W, 11x17).
1–5 sheets: 25 sets, 6–10 sheets: 15 sets,
11–20 sheets: 10 sets
Stapling capacity
(90 g/m
2
):
Offset Tray
Saddle Stitch
65 sheets (up to A4), 30 sheets (up to A3 & mixed).
Max: 300 g/m
2
(2 sheets) + 90 g/m
2
(63 sheets)
20 sheets - (Booklet Front cover up to 256 g/m
2
)
Staple position:
3 locations (Front slant, Rear slant & 2 staples).
Staple less staple:
Supported - Maximum 5 sheets (A3, A4):-
Recommended: Up to 5 sheets (64 g/m
2
), Up to 4 sheets
(64-81 g/m
2
), Up to 3 sheets (81 to 105 g/m
2
).
Manual staple:
Supported (Rear slant only).
Punch Unit:
Opt: MX-PN16B/C/D
Power requirements:
From Main Engine
MX-TR20 – JOB SEPARATOR TRAY
Output capacity (80 g/m
2
):
Upper Tray
Centre Tray
100 sheets
250 sheets
Paper size:
Offset
Output only
A3 to A5R
SRA3 to A5R (including envelope & custom size paper)
Paper weight:
Upper Tray
Centre Tray
55 g/m
2
to 256 g/m
2
55 g/m
2
to 300 g/m
2
Note: The above specification details are for guidance only -Please refer to the Peripheral Service Manual
for detailed paper type and weight specifications.