Sharp MX-4100N - Page 229

MX-5001N SIMULATION 6 – 82
46-26
Purpose
Adjustment
Function (Purpose)
Used to reset the single color mode color
balance set value to the default.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The color balance value of the single color mode is reset to the
default value.
46-27
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the gamma/density of copy
images, texts, and line image edges.
Section
Operation/Procedure
1) Select a target item of setting with [↑] [↓] key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
When the adjustment values of items A, C, and E are changed, the
gamma of text and line edge image density section is changed.
When the adjustment value is increased, the image contrast of
character edge and line edge is increased. When the adjustment
value is decreased, the image contrast of character and line edge
is decreased.
When the adjustment values of items B, D, and F are increased,
the image density of text and line edge section is decreased, and
vice versa.
46-30
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the resolution in the sub
scanning direction in the copy mode.
Section
Operation/Procedure
1) Refer to the following table, and enter the set value corre-
sponding to the resolution mode with 10 key.
2) Press [OK] key. (The set value is saved.)
Item/Display
(Copy mode)
Content
Setting
range
Default
value
A BLACK TEXT
(SLOPE)
Black character edge
gamma skew
adjustment
1 - 99 50
B BLACK TEXT
(INTERCEPT)
Black character edge
density adjustment
1 - 99 50
C COLOR TEXT
(SLOPE)
Color character edge
gamma skew
adjustment
1 - 99 50
D COLOR TEXT
(INTERCEPT)
Color character edge
density adjustment
1 - 99 50
E ED TEXT
(SLOPE)
Text/Map mode gamma
adjustment (Text/Map
mode)
1 - 99 50
F ED TEXT
(INTERCEPT)
Text/Map mode density
adjustment (Text/Map
mode)
1 - 99 50
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6,1*/(&2/2502'(&2/25%$/$1&(6(783



$˖
˷˹
˖5('
$˖
˖*5((1
%˖
˖%/8(
&˖
˖&<$1
'˖
˖<(//2:
)˖
˖0$*(17$
(˖
2.
& 0 <
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6,1*/(&2/2502'(67$1'$5'5$7(6(783


$5(<28685("
<(6 12 (;(&87(
Item/Display Content
Setting
range
Default
value
A SCAN
RESOLUTION
SW
Scan resolution
selection
(COPY: COLOR)
Mode1 0 - 1 0 0
Mode2 1
Mode Scan mode
Resolution in the sub scanning direction
(DPI)
25-99%
[Magnifica-
tion ratio]
100-200%
[Magnifica-
tion ratio]
201-400%
[Magnifica-
tion ratio]
Mode1 OC 600 600 1200
RSPF 600 600 1200
DSPF 600 600 1200
Mode2 OC 300 600 1200
RSPF 400 600 1200
OC 300 600 1200
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
&2()),&,(172)*$00$6(783



$˖
˷˹
˖%/$&.7(;76/23(
$˖
˖%/$&.7(;7,17(5&(37
%˖
˖&2/257(;76/23(
&˖
˖&2/257(;7,17(5&(37
'˖
˖('7(;7,17(5&(37
)˖
˖('7(;76/23(
(˖
2.
ǂǂǂ6,08/$7,21
ǂǂ12
&/26(
7(67
6&$15(62/87,216(77,1*



$˖
˷
˹
˖6&$15(62/87,216:
$˖

2.