MX3500N DUPLEX SECTION G – 5
4) ADU transport path detection.
h. Paper exit roller 2 (Drive)
1) Open the right door unit.
2) Remove the connector cover ADU inner cover.
3) Remove the ADU cabinet F. Remove the ADU cabinet R.
4) Remove the right paper exit upper cabinet unit.
5) Remove each parts, then remove the transport roller 2 (drive).
i. Transport roller 10 (Drive)
j. Transport roller 11 (Drive)
1) Open the right door unit.
2) Remove the connector cover ADU inner cover.
3) Remove the ADU cabinet R.
4) Remove the ADU cabinet F.
5) Open the ADU open/close door.
6) Remove each parts, and remove the trasnport roller 10 (drive)
(A) and the trasnport roller 11 (drive) (B).
k. ADU transport path detection 2
1) Open the right door unit.
2) Remove the right door transport PG, the follower pressure
plate, and the ADU waste toner cover.
1
2
1
1
2
A
B
To Next Page
Loading...
