MX3500N DUPLEX SECTION G – 6
3) Remove the ADU trasnsport path detector 2.
l. Transport roller 13 (Drive)
1) Open the right door.
2) Remove the connector cover ADU inner cover.
3) Remove the ADU cabinet R.
4) Remove the ADU cabinet F.
5) Remove the right paper exit upper cabinet unit.
6) Remove the reverse PG unit.
7) Remove each parts, and remove the trasnport roller 13 (drive).
m. ADU gate
1) Open the right door.
2) Remove the connector cover ADU inner cover.
3) Remove the ADU cabinet R.
4) Remove the ADU cabinet F.
5) Remove the E-ring, and the ADU gate.
n. ADU gate solenoid
1) Open the right door.
2) Remove the connector cover ADU inner cover.
3) Disconnect the connector, and remove the ADU gate solenoid
unit.
Remove the ADU gate solenoid unit.
(2) Others
a. ADU motor lower
1) Remove the rear cabinet.
2) Open the control box.
3) Disconnect the connector, and remove the ADU motor lower.
2
2
1
3
2
1
To Next Page
Loading...
