Caution:
During firmware upgrade, do not perform any of the following:-
Perform any key operation on the operation panel.
Do Not remove the USB memory device.
Do Not power off the MX-B201D until the firmware upgrade procedure is completed.
If ERR is displayed, check if the USB memory device is “write protected” or has a hidden
partition.
8. When Download Complete is displayed on the operation panel, the firmware upgrade
procedure is complete.
9. Power OFF the MX-B201D and remove the USB memory device from the machine, before
powering back ON.
Note:
When powering ON for the first time after a firmware upgrade, the MX-NB11 may take up
to 20 seconds to initialise, before network connectivity is available.
Firmware Upgrade is Complete.
To Next Page
Loading...
