Sharp MX-B201D

35
BEFORE INSTALLATION
Hardware and software requirements
Check the following hardware and software requirements in order to install the
software.
*
1
Compatible with Windows 2000 Professional, Windows XP Professional, Windows XP
Home Edition, Windows Vista or Windows 7 preinstalled model standardly equipped
with a USB port.
*
2
Printing is not available in MS-DOS mode.
*
3
The machine does not support printing from a Macintosh environment.
*
4
Administrator's rights are required to install the software using the installer.
Installation environment and usable software
The following table shows the drivers and software that can be installed for each
version of Windows and interface connection method.
* Sharpdesk can not be used under Windows 2000 environment.
Computer type IBM PC/AT or compatible computer equipped with a
USB2.0*
1
Operating system*
2
*
3
*
4
Windows 2000 Professional, Windows XP, Windows
Vista, Windows 7
Display 1024 x 768 dots resolution and 16-bit colour or higher is
recommended.
Hard disk free space 150MB or more
Other hardware
requirements
An environment on which any of the operating systems
listed above can fully operate
Cable Operating system
MFP Driver
Button
Manager
Sharpdesk *
Printer
driver
Scanner
driver
USB
Windows
2000/XP/Vista/7
Available