Sharp MX-B201D

ACCOUNT CONTROL SETTINGS
82
Enabling auditing mode
4
Press the [ ] key ( ) or [ ] key ( ) to
select "2: ACC. CONTROL SET" and then
press the [OK] key.
5
5
Press the [ ] key ( ) or [ ] key ( ) to
select "1: AUDITING MODE" and then
press the [OK] key.
5
Auditing Mode is disabled by default.
When Auditing Mode is enabled, a count is kept of
the number of pages output by each account (up to
15 accounts can be established).
To use the machine, the 5-digit account number
programmed for the user’s account must be entered (p.83).
5
6
ACCOUNT CONTROL
2:ACC. CONTROL SET
ACC. CONTROL SET
1:AUDITING MODE