Sharp MX-B382 Start Guide

28
BEFORE INSTALLING THE SOFTWARE
CONNECTING THE MACHINE
CONNECTING TO A NETWORK
To connect the machine to a network, connect the LAN cable to the machine's network
connector. Use a shielded LAN cable.
After connecting the machine to a network, be sure to configure the IP address and other
network settings before installing the software. (The factory default setting for the IP
address is to receive the IP address automatically when the machine is used in a DHCP
environment.)
Network settings can be configured using "Network Settings" in the system settings
(administrator) on the machine.
 Checking the IP address of the machine
You can check the IP address of the machine by printing out the "All Custom Setting List"
in the system settings. Follow these steps to print out the "All Custom Setting List".
Press the [SYSTEM SETTINGS] key, touch the [List Print (User)] key, and then touch the
[Print] key of "All Custom Setting List".
CONNECTING THE MACHINE WITH A USB CABLE (Windows)
The machine can be connected to a computer using a USB cable if the computer is a
Windows computer. (The USB interface on the machine cannot be used in a Macintosh
environment.)
The machine and computer should be connected while the printer driver is being
installed. If a USB cable is connected before the printer driver is installed, the printer
driver will not be installed correctly. For the procedure for connecting a USB cable, see
"WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE" (Operation
Guide).
• If the machine is used in a DHCP environment, the IP address of the
machine may change. If this happens, printing will not be possible. This
problem can be avoided by using a WINS server or by assigning a
permanent IP address to the machine.
• This manual explains how to set up the software in a Windows network
environment.
• To use the machine on an IPv6 network, the IPv6 setting must be
enabled in "Network Settings" in the system settings (administrator).

Sharp MX-B382 Specifications

General

Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	38 ppm
Copier resize	50 - 200 %
Maximum number of copies	999 copies
Time to first copy (black, normal)	8 s
Scan to	E-mail, File, FTP, Image, USB
Maximum scan area	A4 (210 x 297) mm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 600 DPI
Faxing	-
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)	203.2 x 97.8 DPI
Fax transmission speed	3 sec/page
Fax speed dialing (max numbers)	999
PCL fonts	80
Printer fonts	PCL, PostScript
Printing colors	Black
Stapling capacity	30 sheets
Maximum duty cycle	- pages per month
Number of PostScript fonts	136
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Fonts included	Yes
Total input capacity	600 sheets
Total output capacity	280 sheets
Maximum input capacity	2100 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Plain paper
Paper tray media weight	55 - 209 g/m²
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Display	LCD
Control type	Touch
Product color	Gray
Display diagonal	7 \
Market positioning	Business
Mobile printing technologies	Not supported
Supported network protocols (IPv4)	TCP/IP, IPX/SPX (NetWare), NetBEUI, EtherTalk (AppleTalk)
Supported network protocols (IPv6)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Maximum internal memory	1536 MB
Internal storage capacity	80 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	1840 W

Weight and Dimensions

Depth	493 mm
Width	560 mm
Height	714 mm