Sharp MX-B382 - Automatic Document Feeder Specifications

45
SPECIFICATIONS
Automatic document feeder specifications
*
1
Scanning in mono 2 mode of one side only is possible in fax and scan send modes.
*
2
Heavy paper (129 g /m
2
(34 lbs.) to 280 g /m
2
(75 lbs.)) is only discharged at the heavy
exit.
Original sizes
MX-B382:
A4 (8-1/2" x 14") to A5 (5-1/2" x 8-1/2"), long paper
(max. width 216 mm (8-1/2") x max. length 500 mm*
1
(19-5/8"))
MX-B382SC:
A4 (8-1/2" x 14") to A5 (5-1/2" x 8-1/2"), long paper
(max. width 216 mm (8-1/2") x max. length 500 mm*
1
(19-5/8")),
Card size (54 mm x 86 mm), Check size (76 mm x 155 mm)
Original weight*
2
MX-B382:
One-sided 35 g /m
2
(9 lbs. ) to 128 g /m
2
(32 lbs.) (Paper weights from
35
g /m
2
(9 lbs.) to 49 g /m
2
(13 lbs.) require the use of slow scan mode.)
Two-sided 50 g /m
2
(13 lbs.) to 105 g /m
2
(28 lbs.)
MX-B382SC:
One-sided 35 g /m
2
(9 lbs.) to 280 g /m
2
(73 lbs.) (Paper weights from
35
g /m
2
(9 lbs. ) to 49 g /m
2
(13 lbs.) require the use of slow scan mode.)
Two-sided 50 g /m
2
(13 lbs.) to 280 g /m
2
(73 lbs.)
Capacity
MX-B382:
50 sheets (80 g/m
2
(21 lbs.)) Maximum stack height of 6.5 mm
(1/4")
MX-B382SC:
100 sheets (80 g /m
2
(21 lbs.)) Maximum stack height of 13 mm
(1/2")