7
CAUTIONS
Handling precautions
The machine includes the document filing function, which stores document image data
on the machine's hard drive. Stored documents can be called up and printed or
transmitted as needed. If a hard drive failure occurs, it will no longer be possible to call up
the stored document data. To prevent the loss of important documents in the unlikely
event of a hard drive failure, keep the originals of important documents or store the
original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no
responsibility for any damages or loss due to the loss of stored document data.
WARNING
Do not place a container of water or other
liquid, or a metal object that might fall inside,
on the machine.
If the liquid spills or the object
falls into the machine, fire or
electrical shock may result.
Do not remove the machine casing.
High-voltage parts inside the machine may cause
electrical shock.
Do not make any modifications to this machine.
Doing so may result in personal injury or damage
to the machine.
Do not use a flammable spray to clean the
machine.
If gas from the spray comes in contact with hot
electrical components or the fusing unit inside the
machine, fire or electrical shock may result.
If you notice smoke, a strange odor, or
other abnormality, do not use the machine.
If used in this condition, fire
or electrical shock may result.
Immediately switch off the
main power and remove the
power plug from the power
outlet. Contact your dealer or
nearest authorised service
representative.
If a thunder storm begins, switch off the
main power and remove the power plug from
the outlet to prevent electrical shock and fire
due to lightning.
If a piece of metal or water enters the
machine, switch off the main power and
remove the power plug from the power
outlet.
Contact your dealer or nearest authorised
service representative. Using the machine in
this condition may result in electrical shock or
fire.
CAUTION
Do not look directly at the light source.
Doing so may damage your
eyes.
Do not block the ventilation ports on the
machine. Do not install the machine in a
location that will block the ventilation ports.
Blocking the ventilation ports will cause heat to
build up in the machine, creating a risk of fire.
The fusing unit and paper
exit area are hot. When
removing a misfeed, do
not touch the fusing unit
and paper exit area. Take
care not to burn yourself.
When loading paper, removing a misfeed,
performing maintenance, closing the front
and side covers, and inserting and removing
trays, take care that your fingers are not
pinched.
Fusing
unit
Paper
exit area
To Next Page
Loading...
Need help?
General
Weight and Dimensions
