Sharp MX-B382 Start Guide

5
CAUTIONS
Installation notes
CAUTION
Do not install in a location with moisture or
dust.
Risk of fire and electrical shock.
If dust enters the machine, dirty
output and machine failure may
result.
Locations that are excessively hot, cold,
humid, or dry (near heaters, humidifiers, air
conditioners, etc.)
The paper will become damp and condensation
may form inside the machine, causing misfeeds
and dirty output.
☞ Ambient environment (page 43)
If the location has an ultrasonic humidifier, use
pure water for humidifiers in the humidifier. If tap
water is used, minerals and other impurities will be
emitted, causing impurities to collect on the inside
of the machine and create dirty output.
Do not install the machine on an unstable or
slanted surface. Install the machine on a
surface that can withstand the weight of the
machine.
Risk of injury due to the machine falling or
toppling. If peripheral devices are to be installed,
do not install on an uneven floor, slanted surface,
or otherwise unstable surface. Danger of slippage,
falling, and toppling. Install the product on a flat,
stable surface that can withstand the weight of the
product. (Weight when various peripheral devices
are installed: approx. 57 kg (125.7 lbs.))
Locations exposed to
direct sunlight
Plastic parts may
become deformed
and dirty output
may result.
Installing the machine next to
a diazo copy machine may
cause dirty output.
Locations with ammonia gas
Do not install the machine in a location with
poor ventilation. Install so that exhaust from
the machine does not directly contact people.
A small amount of ozone is created inside the
machine during printing. The amount of ozone
created is not sufficient to be harmful; however,
an unpleasant odor may be noticed during large
copy runs, and thus the machine should be
installed in a room with a ventilation fan or
windows that provide sufficient air circulation.
(The odor may occasionally cause headaches.)
* Install the machine so that people are not
directly exposed to exhaust from the machine.
If installed near a window, ensure that the
machine is not exposed to direct sunlight.

Sharp MX-B382 Specifications

General

Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	38 ppm
Copier resize	50 - 200 %
Maximum number of copies	999 copies
Time to first copy (black, normal)	8 s
Scan to	E-mail, File, FTP, Image, USB
Maximum scan area	A4 (210 x 297) mm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 600 DPI
Faxing	-
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)	203.2 x 97.8 DPI
Fax transmission speed	3 sec/page
Fax speed dialing (max numbers)	999
PCL fonts	80
Printer fonts	PCL, PostScript
Printing colors	Black
Stapling capacity	30 sheets
Maximum duty cycle	- pages per month
Number of PostScript fonts	136
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Fonts included	Yes
Total input capacity	600 sheets
Total output capacity	280 sheets
Maximum input capacity	2100 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Plain paper
Paper tray media weight	55 - 209 g/m²
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Display	LCD
Control type	Touch
Product color	Gray
Display diagonal	7 \
Market positioning	Business
Mobile printing technologies	Not supported
Supported network protocols (IPv4)	TCP/IP, IPX/SPX (NetWare), NetBEUI, EtherTalk (AppleTalk)
Supported network protocols (IPv6)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Maximum internal memory	1536 MB
Internal storage capacity	80 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	1840 W

Weight and Dimensions

Depth	493 mm
Width	560 mm
Height	714 mm