Sharp MX-B401 - Changing the Exposure and Original Image Type

100
CHANGING THE EXPOSURE AND
ORIGINAL IMAGE TYPE
Exposure and original image type settings can be selected as appropriate
for the original.
The procedure for darkening the exposure and setting the original image
type to "Text/Prtd. Photo" is explained below.
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings in the touch
panel.
(1) Touch the [Exposure] key.
(2) Read the displayed
message and touch the
[OK] key.
(3) Touch the [Text/Prtd.
Photo] key.
(4) Darken light colors with the
key.
5 levels are available for the
exposure. Darken light originals
with the key, and lighten
dark originals with the key.
(5) Touch the [OK] key.
The side to be scanned must be face up!
When Fax/I-Fax address is included,
exposure setting shared is selected,
and Original Image Type is disabled.
Auto
Auto
File
Quick File
Address Review
Send Settings
Address Entry
Address Book
USB Mem. ScanFaxInternet Fax PC Scan
Special Modes
Color Mode
File Format
PDF
PDF
Resolution
Exposure
Original
Scan:
Scan
Send:
200X200dpi
Moiré Reduction
Scan/Exposure
OK
Original Image Type
Text/
Prtd.Photo
Text/Photo
Photo
Printed
Photo
Text
Map
Auto
Manual
3
1
5
8½x11
Mono2
OK
(1)
(2)
(5)
(4)
(3)
mxb401_us_qck.book 100 ページ ２００９年１月８日 木曜日 午後２時１分