103
CHANGING THE FILE FORMAT
The file format (file type and compression method) for sending a scanned
image is specified when the destination is stored in a one-touch key;
however, you can change the format at the time of transmission.
The procedure for sending a scanned image in full color TIFF format is
explained below.
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings in the touch
panel.
(1) Touch the [File Format]
key.
(2) Read the displayed
message and touch the
[OK] key.
(3) Change the mode to
Color/Grayscale mode.
The side to be scanned must be face up!
Auto
Auto
File
Quick File
Address Review
Send Settings
Address Entry
Address Book
USB Mem. ScanFaxInternet Fax PC Scan
Special Modes
Color Mode
File Format
PDF
PDF
Resolution
Exposure
Original
Scan:
Scan
Send:
200X200dpi
Select a file format to apply it to
all scan destinations.
OK
Scan/File Format
OK
PDF
MMR (G4)
B/W
TIFF
XPS
Encrypt PDF
Programmed
None
MH (G3)
Color/Gray
Specified Pages per File
File Type
(1-99)
Compression Mode
8½x11
Mono2
(1)
(2)
(3)
mxb401_us_qck.book 103 ページ ２００９年１月８日 木曜日 午後２時１分
To Next Page
Loading...
