Sharp MX-B401 - Base Screen of Fax Mode

72
BASE SCREEN OF FAX MODE
Touch the [IMAGE SEND] key in the touch panel to open the base screen of
fax mode. If the fax screen does not appear, touch the [Fax] tab.
Select fax settings in the base screen.
(1) Send mode tabs
Use these tabs to change the
mode of the image send function.
To switch to fax mode, touch the
[Fax] tab.
(2) [Address Book] key
Touch this key to dial using a
one-touch key or group key. When
the key is touched, the address
book screen appears.
(3) [Direct TX] key
Touch this key to send a fax by
direct transmission. When the
[Direct TX] key is not highlighted,
normal transmission (memory TX
mode) is selected.
(4) [Sub Address] key
Touch this key to enter a
sub-address and passcode for
F-code transmission.
(5) Customized keys
The keys that appear here can be
changed to show the settings or
functions that you prefer.
(6) key
Touch this key to retrieve a
destination using a search
number.*
* 3-digit number assigned to a
destination when it is stored.
(7) [Speaker] key / [Pause] key /
[Space] key
Touch this key to dial using the
speaker.
When entering a fax number to be
dialed, the key changes to the
[Pause] key. When entering a
sub-address, the key changes to
the [Space] key.
Auto
Auto
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
USB Mem. ScanFaxInternet Fax PC Scan
Special Modes
Resolution
Exposure
Original
Scan:
Scan
Send:
Standard
Auto Reception
Fax Memory:100%
Speaker
Ready to send.
Resend
8½x11
(7)
(8)
(9)
(1)
(2)
(3)
(4)
(12)
(5)
(6)
(13)
(11)
(10)
mxb401_us_qck.book 72 ページ ２００９年１月８日 木曜日 午後２時１分