Sharp MX-B455W

2-7
COPIER►BEFORE USING THE MACHINE AS A COPIER
COPYING SEQUENCE
This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
1
Switch to copy mode.
► SELECTING COPY MODE (page 2-4)
2
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-75)
► DOCUMENT GLASS (page 1-77)
3
Select functions.
Specify the original scan size, exposure, resolution, etc.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-29)
If necessary, you can refer to the following functions for the setting.
In Easy mode In Normal mode
• Paper Select ►page 2-12
• 2-Sided Copy ►page 2-16
• Copy Ratio ►page 2-22
• Staple ►page 2-38, ►page 2-38
• Original ►page 2-29
• Exposure ►page 2-19
•N-Up ►page 2-41
• Card Shot ►page 2-43
•Original ►page 2-29
• Paper Select ►page 2-12
• 2-Sided Copy ►page 2-16
• Copy Ratio ►page 2-22
• Exposure ►page 2-19
• Sort/Group ►page 2-37
•Others ►page 2-52
Original
Detail
StapleCopy Ratio2-Sided Copy
Paper
Select
8½x11
Tray 1 1 → 1
100% Off
Preview
Start
Copies
CA
1
8½x11
B5
8½x11
8½x11
8½x11
8½x11
8½x11
8½x11