2-44
COPIER►BASIC PROCEDURE FOR MAKING COPIES
4
Tap the [On] key, and specify the
original size as required.
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• To quickly set the size, first specify a value close to the desired ratio value by the numeric keys, then adjust it by
tapping .
• When you set the [Adjust to Paper Size] checkbox to , the original is enlarged or reduced with the ratio
appropriate to the original size.
To cancel the Card Shot settings:
Tap the [Off] key.
5
Place a card face down on the
document glass, and tap the
[Start] key.
► DOCUMENT GLASS (page 1-77)
6
Place a card face up on the document glass, and tap the [Start] key to scan
the reverse side.
• Copy settings cannot be changed when scanning additional pages.
• To cancel all settings:
Tap the [CA] key.
7
Tap the [Read-End] key to start copying.
To Next Page
