2-69
COPIERâ–ºOTHER FUNCTIONS
3
Tap the image shift direction.
4
Sets a margin shift width.
Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area using
the numeric keys.
After the settings are completed, tap and [Back] keys in sequence.
If you set the [Adjust 2nd pg value to 1st.] checkbox to , goes out and you can set sides 1 and 2 separately.
• To cancel the margin shift setting:
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
5
Tap the [Start] key to start copying.
To Next Page
Loading...
Need help?
General
