4-75
FACSIMILE►OTHERS FUNCTION
3
Tap the [Job Build] key.
A checkmark appears on the icon.
To cancel the job build setting
Tap the [Job Build] key to uncheck it.
4
Change settings as needed.
5
Tap the [Start] key to scan the first original page.
6
Place the next set of originals and tap the [Start] key.
Repeat this step until all originals have been scanned.
• If needed, tap [Change Setting] before tapping the [Start] key, and change the original scan settings and send settings
for the next original. The setting changes will be applied to the next job.
• If you tap the [Preview] key, you cannot scan additional pages.
To cancel scanning:
Tap the [CA] key. All settings including scanned data will be cleared.
7
Tap the [Read-End] key.
If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
To change the time until transmission takes place automatically:
Select "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Common Settings]
→ [Condition Settings] → [Job Auto Start Time During Scanning].
To Next Page
Loading...
