5-78
SCANNER/INTERNET FAX►OTHER FUNCTIONS
• When you turn the card over to scan the back, place the card in the same position as when you scanned the front.
• If a scanning error occurs when scanning the back due to the placement of the original or otherwise, a message will
appear on the touch panel. To send only the front, tap the [OK] key. To discard the initially scanned front data and
return to the base screen, tap the [Cancel] key.
8
Tap the [OK] key.
• Restrictions when Card Shot (Multi) is enabled
The following restrictions apply when Card Shot (Multi) is enabled. Restricted items may change automatically.
• Address: If an Internet Fax address is added, Card Shot (Multi) will be disabled.
• Resolution: 600 x 600 dpi is automatically set. The setting can be changed.
• Scan size / send size: Only auto can be used..
• Two-sided original: Only one-sided original is enabled.
• Image Orientation: Cannot be used. (Each cropped original is corrected to the orientation that is least skewed.)
• Format: PDF/A-1a, TXT (UTF-8), RTF, DOCX, XLSX and PPTX cannot be used. High-compression/high-resolution
PDF (including PDF/A-1b) cannot be used.
• Compression mode / compression ratio: Black text emphasis cannot be used.
• One file per page: Enabled when a checkmark appears. “2” when one-sided original is selected. (“3” or higher
cannot be entered.)
• The following functions cannot be used at the same time as Card Shot (Multi).
Job Build, Slow Scan Mode, Mixed Size Original, Erase, Card Shot, Blank Page Skip, File, Quick File, Preview,
Business Card Scan, Image Crop, Multicrop
• When the Card Shot (Multi) setting is canceled, the following items retain the setting changes that were made when
Card Shot (Multi) was enabled.
Resolution, Scan Size, Send Size, 2-Sided Original, File Type, OCR, Compression Mode/Compression Ratio,
Specified Pages per File
• When the Card Shot (Multi) setting is canceled, the Original Count setting remains available.
• Some originals may not extract to a file correctly.
To Next Page
Loading...
Need help?
General
