Sharp MX-B455W User Manual

5-94
SCANNER/INTERNET FAX►OTHER FUNCTIONS
5
Tap or slide the slider to adjust
the contrast level.
After the settings are completed, tap and [Back] keys in
sequence.
To cancel the contrast settings:
Tap the [Off] key.
6
Tap the [Start] key to start scanning of the original.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key. Repeat the procedure until all pages have
been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
You can tap the [Preview] key to check a preview of the image before sending an image. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED (page 5-66)
". However, settings for this function cannot be changed
in the preview screen.
Preview
Start
Back
Others
Color Mode
Contrast
Off
On
Specify density of image to send.
Exposure
1 2 3 54
Adjust Outline of Image
Sharpness
Change Sending Resolution
Resolution
Low High
CA

Sharp MX-B455W Specifications

General

Category	All in One Printer
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed (Black)	45 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Paper Capacity	550 sheets
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi
Monthly Duty Cycle	150, 000 pages
Mobile Printing	Apple AirPrint, Google Cloud Print
Display	7-inch Color Touchscreen