MX-C250 SIMULATION 6 – 60
64
64-1
Purpose
Operation test/check
Function (Purpose)
Test print. (Self print) (Color mode)
Section
Operation/Procedure
1) Select an item to be set with Arrow keys.
2) Enter the set value with 10 keys.
3) Press [OK]/[START] key.
The set value in step 2) is saved.
<Print pattern of Item A>
Item/Display Content Setting range Default value
1 PRINT PATTERN
Specification of the print pattern
(* For details, refer to the description
below.)
1 - 58 1
2DOT1
Setting of print dot number (M parameter)
(Self print pattern: m by n)
0-255 1
3DOT2
Setting of blank dot number
(N parameter) (Self print pattern: m by n)
0-255 254
4 DENSITY Used to specify the print gradation. 0-255 255
5 MULTI COUNT Number of print 1 - 999 1
6
EXPOSURE
THROUGH
Exposure mode
specification
No process (through)
1-8
1
8
(STANDARD
DITHER)
CHAR/PRPIC Text/ Photograph 3
CHAR Text 4
PRINT PIC Printed Photo 5
STANDARD
DITHER
Dither without correc-
tion
8
7 PAPER
MFT
Tray selection
Manual paper feed
1 - 3
1
2 (CS1)CS1 Tray 1 2
CS2 Tray 2 3
8 DUPLEX
YES
Duplex print
selection
Yes
0 - 1
0
1 (NO)
NO No 1
9 PAPER TYPE
PLAIN
Paper type
Standard paper
1 - 5
1
1 (PLAIN)
HEAVY Heavy paper 2
OHP OHP 3
ENVELOPE Envelope 4
GLOSSY Glossy paper 5
10 K Black 0 - 1 1
0
11 C Cyan 0 - 1 2
12 M Magenta 0 - 1 3
13 Y Yellow 0 - 1 4
Pattern No. Content Pattern generating section NOTE
1Grid pattern
LSU-ASIC
2Dot print -
9
Each color 10%
area (A4/A4E)
density print
Each interval is 41.86mm (989dot).
10 8-color belt print
11
4-color dot print
(sub scan)
17
All background
(half tone)
Half tone (MFP ASIC rear
process)
When all colors are selected, print is
made in CMY.
18
256 gradations
pattern
(Other dither)
- When all colors are selected,
print is made in CMY.
- 16 gradations are printed in the
main scanning direction, and
feedback is made, and the next
16 gradations are printed. (16 x
16 patch print)
- Print is made from 255 grada-
tions, and 0-254 gradations are
printed.
21
4-point dot print
(main scan)
LSU-ASIC
22 Slant line