EasyManua.ls Logo

Sharp MX-C358F

Sharp MX-C358F
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Menu item Description
Digits to Mask
0–58 (0*)
Specify the number of digits to mask in an outgoing fax number.
Enable Line Connected
Detection
O
On*
Determine whether a telephone line is connected to the printer.
Note: Events are detected immediately.
Enable Line In Wrong Jack
Detection
O
On*
Determine whether a telephone line is connected to the correct port on the
printer.
Note: Events are detected immediately.
Enable Extension in Use
Support
O
On*
Determine whether a telephone line is used by another device, such as another
phone on the same line.
Note: Events are detected immediately.
Optimize Fax Compatibility Configure the printer fax functionality for optimal compatibility with other fax
machines.
Fax Transport
T.38
Analog
G.711
Set the fax transport method.
Note: This menu item appears only if a Fax over IP (FoIP) license bundle is
installed in the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Send Settings
Menu item Description
Resolution
Standard*
Fine
Super Fine
Ultra Fine
Set the resolution of the scanned image.
Note: A higher resolution increases fax transmission time and requires more
memory.
Original Size
[List of paper sizes] (Mixed
Sizes*)
Specify the size of the original document.
Orientation
Portrait*
Landscape
Specify the orientation of the original document.
Sides
O*
Short Edge
Long Edge
Specify the orientation of the original document when scanning on both sides
of the document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 124

Table of Contents

Related product manuals