Sharp MX-C358F User Manual

Menu item Description
Transport For Outgoing Calls
UDP*
TCP
Set the SIP transport type for outgoing calls.
Outbound Proxy Specify an outbound proxy to forward all SIP communication.
Contact Specify a contact name for SIP.
Realm Specify a realm name for SIP.
Note: If the Realm setting is not set, the setting uses the name of the Contact
instead.
SIP Registration Status Show the status of the SIP Registration.
Note: An asterisk (*) next to a value indicates the factory default setting.
H.323 Settings
Menu item Description
Gateway Specify the H.323 gateway IP address.
Gatekeeper Specify the H.323 gatekeeper.
User Specify the user name used with the H.323 gateway.
Password Specify the password for the H.323 gateway.
Enable Fast Start
O*
On
Enable Fast Start.
Disable H.245 Tunneling
O*
On
Disable H.323 Tunneling.
Disable Gatekeeper Discovery
O
On*
Disable H.323 Gatekeeper Discovery.
Note: An asterisk (*) next to a value indicates the factory default setting.
T.38 Settings
Menu item Description
Indicator Redundancy
0–5 (3*)
Set the number of times that a fax indicator is repeated in the T.38
communication.
Low Speed Redundancy
0–5 (3*)
Set the number of times that low speed data is repeated in the T.38
communication.
High Speed Redundancy
0–5 (1*)
Set the number of times that high-speed data is repeated in the T.38
communication.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 133

Sharp MX-C358F Specifications

General

Brand	Sharp
Model	MX-C358F
Category	All in One Printer
Language	English