3 Place the ADF tray back into place.
Paper jam in door A
Paper jam below the fuser
1
Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
Warning—Potential Damage: To prevent damage from electrostatic discharge, touch any exposed metal
frame of the printer before accessing or touching interior areas of the printer.
2 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Troubleshoot a problem 264
To Next Page
Loading...
Need help?
General
