36
INSTALLING THE PRINTER DRIVER
6
Click the [OK] button in the printer properties window.
If automatic configuration fails, configure the settings manually.
• You can check the options that are installed and the tray settings by printing
out the "All Custom Setting List" in the system settings of the machine.
(However, note that "Input Tray Options" must be set to the number of trays
on the machine.) The "All Custom Settings List" can be printed from [List Print
(User)] in the system settings.
• Click the [Set Tray Status] button and the [Paper Type Name] button to check
the settings of each.
Set Tray Status: The "Tray Settings" in "Paper Tray Settings" in system
settings of the machine are reflected in the settings
shown here. Specify the size and type of paper loaded in
each tray.
Paper Type Name: The "Paper Type Registration" settings in "Paper Tray
Settings" in the system settings of the machine are
reflected in the settings shown here. If a user type name
(1 to 7) was changed, enter the changed name.
!mxc400P_us_ins.book 36 ページ ２００９年１０月５日 月曜日 午後２時２７分
To Next Page
Loading...
Need help?
General
