Sharp MX-C400P Software Setup Guide

40
CHANGING THE PORT
When using the machine in a Windows environment, follow the steps below to
change the port when you have changed the IP address of the machine when
the machine is connected with a USB cable.
1
Click the [Start] button ( ), click [Control Panel], and then click
[Printer].
• In Windows 7, click the [Start] button and then click [Devices and Printers].
• In Windows XP/Server 2003, click the [start] button and then click [Printers and
Faxes].
• In Windows 98/Me/NT 4.0/2000, click the [Start] button, select [Settings], and
then click [Printers].
2
Open the printer properties window.
(1) Right-click the printer driver icon of the machine.
(2) Select [Properties].
In Windows 7, select [Printer Properties].
If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click
the [start] button, click [Control Panel], click [Printers and Other Hardware], and
then click [Printers and Faxes].
!mxc400P_us_ins.book 40 ページ ２００９年１０月５日 月曜日 午後２時２７分

Sharp MX-C400P Specifications

General

Brand	Sharp
Model	MX-C400P
Category	Printer
Language	English