3
CD-ROMS AND SOFTWARE
- PPD driver
The PPD driver enables the machine to use the standard Windows PS
printer driver.
☞ WHEN THE MACHINE IS CONNECTED TO A NETWORK (page 9)
☞ WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE
(page 21)
• Printer Status Monitor (can only be used when the machine is
connected to a network)
This allows you to monitor the status of the machine on your computer screen.
☞ INSTALLING THE PRINTER STATUS MONITOR (page 38)
Disc 2
Software for Windows
• Printer Administration Utility (can only be used when the machine is
connected to a network)
This allows the administrator to monitor the machine and configure machine
settings from a computer. To install and use the Printer Administration Utility,
see the Readme file and the manual in PDF format on the "Software
CD-ROM" (Disc 2). The Readme file and manual are in the following folder on
the CD-ROM. (Substitute the letter of your CD-ROM drive for "R" in the
following path.)
R:\Sadmin\Documents\EnglishA
Software for Macintosh
• PPD file
This is the printer description file which enables the machine to be used as a
PostScript 3 compatible printer.
☞ MAC OS X (page 43)
☞ MAC OS 9.0 - 9.2.2 (page 52)
To use the machine as a printer in a Macintosh environment, the machine
must be connected to a network. A USB connection cannot be used.
!mxc400P_us_ins.book 3 ページ ２００９年１０月５日 月曜日 午後２時２７分
To Next Page
Loading...
Need help?
General
