Sharp MX-C400P Software Setup Guide

54
MAC OS 9.0 - 9.2.2
10
Select the PPD file.
(1) Click the PPD file for your model.
(2) Click the [Select] button.
11
Make sure that the machine is selected in the "Select a PostScript
Printer" list and then click the [Setup] button.
12
Click the [Configure] button.
• If the above dialog box does not appear and you return to the "Chooser"
dialog box, follow these steps to select the PPD file manually.
(1) Make sure that the machine is selected in the "Select a PostScript Printer"
list, and then click the [Setup] button followed by the [Select PPD] button.
(2) Select the PPD file for your model and click the [Open] button.
(3) Click the [OK] button.
•
The PPD file is installed in the [Printer Descriptions] folder in the [Extensions] folder.
To automatically configure the settings based on the installed machine options
that are detected, click the [Auto Setup] button.
(1)
(2)
!mxc400P_us_ins.book 54 ページ ２００９年１０月５日 月曜日 午後２時２７分

Sharp MX-C400P Specifications

General

Brand	Sharp
Model	MX-C400P
Category	Printer
Language	English