11 Insert the waste toner bottle.
12 Close door B.
13 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
14 Reset the maintenance counter. For more information, see “Resetting the maintenance counter” on
page 177.
Resetting the maintenance counter
1 From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage
And Counters.
2 Select Fuser Reset or ITM Reset.
Resetting the supply usage counters
1 From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage
And Counters.
2 Select the counter that you want to reset.
Warning—Potential Damage: Supplies and parts without use‑and‑return program agreement terms may be
reset and remanufactured. However, the manufacturer’s warranty does not cover any damage caused by
non-genuine supplies or parts. Resetting counters on the supply or part without proper remanufacturing can
cause damage to your printer. After resetting the supply or part counter, your printer may display an error
indicating the presence of the reset item.
Moving the printer
Moving the printer to another location
CAUTION—POTENTIAL INJURY: If the printer weight is greater than 20 kg (44 lb), then it may require
two or more people to lift it safely.
Maintaining the printer 177
To Next Page
Loading...
