Scanning to a fax server
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Scan Center, and then from the list of destinations, select Fax.
3 Select a fax destination.
Note: To create a fax destination, touch Create Fax.
4 Scan the document.
Scanning to a network folder
1 Load the document into the ADF tray or on the scanner glass.
2 From the home screen, touch Scan Center.
Note: The icon and name may have been changed. For more information, contact your administrator.
3 Do either of the following:
• Select a destination.
Note: For SFTP, set the port number to 22.
• Use a shortcut by touching , and then selecting the shortcut from the list.
4 Scan the document.
Scanning 59
To Next Page
Loading...
