Holding faxes
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
2 Select a mode.
Forwarding a fax
Using the control panel
1 Create a fax destination shortcut.
a From the home screen, touch Fax > To.
b Enter the recipient number, and then touch Done.
c To uc h .
d Create a shortcut.
2 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
3 In the Fax Forwarding menu, touch Forward.
4 In the Forward to menu,
configure
the destination.
Using the Embedded Web Server
1 Create a fax destination shortcut.
a Open a web browser, and then type the printer IP address in the address
field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
b Click Shortcuts > Add Shortcut.
c From the Shortcut Type menu, select Fax, and then configure the settings.
d Apply the changes.
2 Click Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
3 In the Fax Forwarding menu, select Forward.
4 In the Forward to menu, configure the destination.
Faxing 55
To Next Page
Loading...
Need help?
General
