Menu item Description
Fax Number Masking
O*
From Left
From Right
Specify the format for masking an outgoing fax number.
Digits to Mask
0–58 (0*)
Specify the number of digits to mask in an outgoing fax number.
Enable Line Connected
Detection
O
On*
Determine whether a telephone line is connected to the printer.
Notes:
• Detection takes place when turning on the printer and before each call.
• This menu item does not appear if Fax Transport is set to T.38.
Enable Line In Wrong Jack
Detection
O
On*
Determine whether a telephone line is connected to the correct port on the
printer.
Notes:
• Detection takes place when turning on the printer and before each call.
• This menu item does not appear if Fax Transport is set to T.38.
Enable Extension in Use
Support
O
On*
Determine whether a telephone line is used by another device, such as another
phone on the same line.
Notes:
• This menu item is monitored continuously after turning on the printer.
• This menu item does not appear if Fax Transport is set to T.38.
Optimize Fax Compatibility Configure the printer fax functionality for optimal compatibility with other fax
machines.
Fax Transport
Analog*
etherFAX
None
T.38
Set the fax transport method.
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Send Settings
Menu item Description
Resolution
Standard*
Fine
Super Fine
Ultra Fine
Set the resolution of the scanned image.
Note: A higher resolution increases fax transmission time and requires higher
memory.
Original Size
[List of paper sizes]
Specify the size of the original document.
Note: Letter is the U.S. factory default setting. A4 is the international factory
default setting.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 91
To Next Page
Loading...
Need help?
General
