MX-FX11 FAX SOFTWARE SWITCH 2 – 11
38 8 Print Selection of error page
output when error
occurs during FAX
reception.
Setting to determine whether to output the error page or to not output it and
discard it in cases where communication errors occur during FAX reception.
"0": Output the error page
"1": Do not output the error page
However, in cases where errors occur during F code relay-instructed reception
or F code confidential reception, the error page is not outputted irrespective of
this SW setting.
39 1 Transmission Selection of re-send
page at times of error
Select the page to be re-sent when errors occur during transmissions that do
not contain F code.
"0": Error page and onwards (re-send from the pages that have not been
transmitted to the other party’s machine).
"1": All pages (re-send from the first page including pages that have been
transmitted to the other party’s machine).
When transmitting in F code, all pages are re-transmitted irrespective of this
setting.
2 Print Selection of date and
transmission source
print language
<Format>
Setting to determine the format of the date and transmission source attached
when transmitting FAX.
"0": Date format
"1": North American format
3 Print Relay data output Setting to determine whether or not to output documents received from the
relay command station when F code relay broadcast instructions are received.
"0": Output
"1": Do not output
4 Transmission F code relay broadcast
FAX sender addition
setting
Setting to determine whether the machine's sender is added or not when relay
broadcast send is performed to the FAX remote machines which are registered
in the machine (relay broadcast instruction receiving station) after receiving the
F code relay broadcast instruction is received from a remote machine.
This is in order to cope with the FAX circular specifications.
"0": Added
"1": Not added
5 Communication F code communication
error handling
Setting to determine whether or not to re-send at times of F code
communication.
"0": Re-send
"1": Do not re-send
However, do not re-call in cases where the "Re-call permission at times of
communication error" setting is at "0: Prohibited."
Do not re-send when the other party’s machine does not have F code functions.
6 Transmission F code password
transmission setting
when the other party’s
machine has no
password capacity
Setting to determine the communication procedure in cases where the other
party’s machine has no F code password capacity when conducting F code
communication.
"0": Disconnect with DCN
"1": Send with password
7 Function Remaining receivable
memory
Setting to determine whether to issue a call when remaining memory reaches
64KB or less or 128KB or less.
"0": 128KB
"1": 64KB
8 Function External telephone
setting when no sound
is set
Setting to determine whether or not to use external telephone when no sound is
set.
When the no sound priority setting is made, reception operation is soundless
but communications cannot be sent to and from an external telephone.
When the external telephone priority setting is made, communications can be
sent to and from an external telephone, but reception operation sounds once.
"0": External telephone priority
"1": No sound priority
SW
No.
Bit
No.
Item SW selection and function System settings
To Next Page
Loading...
